Vertical Strawberry Planter

We just completed the build of a small vertical strawberry planter. We used some scrap wood that was given to us and some old milk jugs.

We removed the 1x4's that were part of a packing crate. We then used a hatchet to split about 1" off off the width of the slats. Then we attached milk jugs to the slats by sliding the slat through the handle of the milk jugs. After that, we re-attached the slats to the frame, then cut the bottoms of the milk jugs off. The last step is to take a nail and poke holes in the caps of the milk jugs to allow for drainage.

Following that, the only thing left to do was to fill with soil and plant our strawberry crowns.

The video of the build can be found here.
 
Thanks for stopping by!